Did you know that a small faucet leakage can waste gallons of water in a day? So get this issue addressed as soon as possible to escape the high water bills and undoubtedly for the Peace of your Mind. Well, it is quite simple to fix such a leaky Kitchen Faucets, especially in the case of a compression valve.
How to Fix a Leaky Kitchen Faucet
So you have a leaky faucet, the first step will be to call a plumber. If the worker is not available for some reason, then you can try out the following DIY guide for fixing that annoying faucet leak.
For your information, it is inexpensive to repair a compression faucet. We will list all the tools required for this task, followed by the DIY.
- Flat-head screwdriver
- Adjustable wrench
- Lubricant such as the WD-40
- Replacement parts like the O-rings and Washers
Step #1
This is the most important step. We don’t want you guys to worsen the condition and end up making a pool in the kitchen. So, before starting any work on the leaky faucet, turn off the water supply line. Check all the connections from the knobs underneath, and all the parts which control the water coming from the main line. After all the paths are shut, take your tools and get set.
Step #2
If your faucet has got any extra work done on it, then remove that section gently. With the help of a flathead screwdriver, you can get the decorative part withdrawn from the top. Beneath all the knobs, there will be a screw which sets the handle to the stem. Find all the screws and start unscrewing them. If they are jammed, then make use of the lubricant for loosening the bolt. And finally get the handle off from the stem portion.
Step #3
The next step is to remove the packing nut, and for this make use of the wrench. During this process, the stem may be visible, remove this component as well. The method of removing stems may vary for one faucet to another. Some may have pop-off kind of stems, while some may have to be twisted around the valve for removing. Do a check on the removed parts for any damage.
Step #4
If all the components are doing good at this stage, time to inspect the O-rings and the washer. Most of the leaks are caused because of some issue with these two components.
Here comes the crucial point. Getting the right size for the O-ring and washer is essential. If you are not sure about it, you can take the old components to any hardware shop and asks for a replacement part. This way you can verify as well as get the right size O-ring for the setup.
Step #5
And the final step is to re-assemble all the parts back. Begin in the reverse order, like start from the O-ring or the washer, then stem, packing nut, screw, and finally the join the handle. After you have set the unit, turn on the knob and check if the faucet is working properly.
Here ends the Easy DIY fix for Leaky Faucet, but if you still find the water dripping from the faucet, then the problem will be something else. It may have corroded valve seats or issues with your plumbing itself. In this case, hiring a professional plumber is the only choice.