The corners remain the crucial part while working on Crown Molding. You can get the Crown Molding done by yourself using one Compound Miter Saw. But what is that one thing which makes the compound saw perfect for Crown Molding? We will find out the reason, and also understand the steps involved in this job.
How to Cut Crown Molding with a Compound Miter Saw
Crown Molding task involves two angles – one is the Bevel angle, and the other one is the Miter angle. That’s why we can term it as a ‘compound’ task since it includes two angles. In a compound miter saw you will get a tilting feature and one rotating. The saw is tilted for handling the bevel angle and turns to the left and right side making the Miter angle.
Therefore, you can get both the angles quickly dealt with just one single move. This is why Compound Miter Saw could help you out with creating simple yet innovative Crown Moldings for your home.
Steps for creating your own Crown Molding using one Compound Miter Saw are given below:
#1 Get all the preparations done before starting with the machine
Take up your safety glass and a dust mask, and wear it up! Most of the saws come with preset angles on it, for those 90-degrees corners. Even if the angles are not set, don’t worry! Just rotate the saw in the counter-clockwise direction, and set both the Miter and the Bevel angles on it. Set the Miter angle at 31.6°, whereas Bevel at 33.9° angles.
#2 The Molding work Begins!
Put the molding flat on the saw surface, with the finished part facing upwards. Also, the top of the molding which connects with the ceiling should be placed in such a way that it is against the saw’s fence. First make a right side cut, by slowly sliding the mold to the right-hand side (outside corner). You need to hold the mold with one hand and do the cut. Make sure that you read all the Compound Miter Saw reviews before buying any.
#3 Similar process for the left side cut.
Work for the left side in the same way as you did for the right-hand side. Slide the mold towards the left side of the blade, and get the cut from the inside corner part. Then turn on the miter saw, and make the cut!
Buyers Guide: 10 Best Compound Miter Saw Reviews of 2018 – Top Picks
#4 Now if you wish to work on left and right – inside corners.
For this, place the molding in such a way that the top edge (which connects the ceiling) is kept towards you, and the bottom portion is against the saw fence. Keep the molding in the flat resting position only.
#5 Set the Angle correctly!
If you haven’t set the miter and the bevel angles, then rotate the saw in the clockwise direction. Then adjust the miter at 31.6 degrees. Then tilt the saw to the left side, and set the bevel angle at 33.9 degrees. If the angles are already set, then slide the mold to the right side of the blade (this will cut the left side part for an outside corner). Turn on the saw, and start the cutting.
#6 For the other side.
Perform vice-versa operation for cutting the right side from the inside corner. Slide the mold to the left direction of the blade, and get the right side cut. After it is rightly positioned, turn the saw machine one and begin the cutting process.
This way you can create your personalized Crown Moldings using a simple and Best Compound Miter Saw.
Was this HomeFrik guide helpful to you? Share among your friends and family, who may find it useful. You can give your opinions or other valuable suggestions in the comment section below.